Home > Products > Limit Switch > TZ-8 Miniature Vertical Limit Switch

TZ-8168 coil spring lever Limit Switch

Double-circuit type of limit switch.

Compact new design approximately 1/3 the size of TMAZTZ vertical limit switches.

With strong zinc cast base, and reinforced plastics outer shell, High. Structure preventing oil, water and pressure.

Structure enables the terminal section to be fully opened for easy wiring.

Degree of protection: IP65

Contact Form:

TZ-8108 Limit Switch

Product List

Technical Parameters

TZ-8168


Ratings

Rated voltageNoninductive Load (A)Inductive Load (A)
Resistance LoadLamp LoadInductive Load (A)Motor Load
NCNONCNONCNONCNO
125VAC551.50.73321
250VAC5510.5331.50.8
8VDC55335433
14VDC55334433
30VDC55334433
125VDC0.40.4





250VDC0.20.2





Inrush CurrentN.C: below  24A, N.O: below  12A


NOTE: 

1. Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC).

2. Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.

3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.


Characteristics

Operation speed0.5mm-50cm/sec
Operating frequencyElectical: 30 operations/minute
Contact resistance25mΩ max. (initial value)
Insulation resistance100MΩ Min. (below 500VDC)
ShockMechanical durable: 1, 000m/Sec2 (about 100G'S)
Malfunction: 300m/Sec2 (about 30G'S)
Ambient temperature-5~+65℃ (With no icing)
Humidity<95% RH
WeightAbout 130 to 190g
Degree of protectionIP65
Electrical LifeAbove 500000


Operating Characteristics

Operating Characteristics ModelTZ-8104TZ-8107TZ-8108TZ-8111TZ-8112TZ-8122TZ-8166TZ-8167TZ-8168TZ-8169
Operating forceOF   (Max)5.88N5.88N7.84N9.8N9.8N9.8N0.88N0.88N0.88N0.88N
Release forceRF   (Min)0.49N0.69N0.49N2.94N2.94N2.94N
Pre-travelPT   (Max)20°20°20°1.5mm1.5mm1.5mm30mm30mm30mm30mm
Over-travelOT   (Min)75°75°75°4mm4mm4mm
Movement differentialMD  (Max)10°10°10°1.2mm1.2mm1.2mm
Total travelTT   (Min)95°95°95°5.5mm5.5mm5.5mm
Operational positionOP26±0.8mm

Welcome to our Coil Spring Lever Limit Switch Factory! As a leading China-based supplier, we specialize in providing high-quality coil spring lever limit switches at wholesale prices.

The Coil Spring Lever Limit Switch is a type of mechanical limit switch that utilizes a lever arm with a coil spring to actuate the switch. This type of switch is commonly used in industrial automation applications where accurate positioning or sensing is required.

Our Coil Spring Lever Limit Switches are designed to meet the needs of a wide range of industrial applications, from heavy machinery to smaller projects. We use only high-quality materials and employ strict quality control measures to ensure that our products meet the highest standards of quality and reliability.

As a Coil Spring Lever Limit Switch wholesale supplier, we offer a wide range of options to fit your specific needs. Whether you need a single switch or a large quantity, we can provide you with the best wholesale prices in China without sacrificing quality.

We are committed to providing our customers with the best products and services, which is why we have built a reputation for delivering exceptional products and services to customers worldwide. Trust our factory to deliver the products you need at prices you can afford.

So if you're looking for a reliable source of Coil Spring Lever Limit Switch factory from China, look no further than our factory.

//