Home > Products > Limit Switch > TSA Sealed Limit Switch

TSA-081 rod coil spring lever actuator Limit switch

Strong metal outer shell, swing arm max.±95°;

Stainless steel idler wheel, punch and spring;

Selective M18x1.5 cable gland.

Contact Form:

CSA TSA-012 Metal Roller Limit Switch

Product List

Technical Parameters

TSA-081 rod coil spring lever actuator Limit switch



Ratings

Rated voltageNoninductive Load (A)Inductive Load (A)
Resistance LoadLamp LoadInductive Load (A)Motor Load
NCNONCNONCNONCNO
125VAC551.50.73321
250VAC5510.5331.50.8
8VDC55335433
14VDC55334433
30VDC55334433
125VDC0.40.4





250VDC0.20.2





Inrush CurrentN.C: below  24A, N.O: below  12A

NOTE: 

1. Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC).

2. Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.

3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.


Characteristics

Operation speed0.5mm-50cm/sec
Operating frequencyElectical: 30 operations/minute
Contact resistance25mΩ max. (initial value)
Insulation resistance100mΩ min. (below 500VDC)
Dielectric Strength1000VAC, 50/60 Hz for 1 minute between terminals of the same polarity
1500VAC, 50/60 Hz for 1 minute between current-carrying and non-current-carrying metal parts
1500VAC, 50/60 Hz for 1 minute between each terminal and ground
Vibration10-55Hz,1.5mm double amplitude
Shock

Mechanical durable: 1, 000m/Sec2 (about 100G'S)

Malfunction: 300m/Sec2 (about 30G'S)

Ambient Temperature -10~+65℃ (With no icing)
Humidity<95% RH
Weight

About 195 to 246g

Electrical LifeAbove 500000
Degree of protectionIP65


Operating Characteristics

Operating CharacteristicsModelTSA-001TSA-003TSA-012TSA-021TSA-041TSA-031TSA-051TSA-061TSA-071TSA-081
Operating forceOF  (Max)7.84N7.84N7.84N3.92N3.92N3.92N3.92N1.47N1.47N1.47N
Release forceRF  (Min)3.92N3.92N3.92N0.98N0.98N0.98N0.98N0.49N0.49N0.49N
Pre-travelPT  (Max)1.8mm1.8mm1.8mm20°20°20°20°30mm30mm30mm
Tripping positionTP±10%2.0mm2.0mm2.0mm22.5°22.5°22.5°22.5°22.5°22.5°22.5°
Movement differentialMD (Max)1.2mm1.2mm1.2mm10°10°10°10°14°14°14°
Over travelOT  (Min)4.0mm4.0mm4.0mm75°75°75°75°20mm20mm20mm
Total travelTT  (Min)5.8mm5.8mm5.8mm95°95°95°95°50mm50mm50mm
Rotary indexing



22.5°22.5°22.5°22.5°




//