Home > Products > Limit Switch > WL Heavy Duty Aluminum Sealed Limit Switch

WLCL adjustable rod lever limit switch

Double-circuit type of limit switch, is widely used;

With strong aluminum cast outer shell, High mechanical strength;

Structure preventing oil, water and pressure;

Indicating plate with setting position is installed in it, so it is easy to maintain;

Various of actuators is taken convenience for using;

Built-in contact stand has double-spring, so it has long mechanical life;

Selective M20x1.5 cable gland.

Contact Form:

WLCA2-2 TZ-5104 IP66 Limit Switch

Product List

Technical Parameters

WLCL limit switch

Ratings

Rated voltageNoninductive Load (A)Inductive Load (A)
Resistance LoadLamp LoadInductive Load (A)Motor Load
NCNONCNONCNONCNO
125VAC1031.51052
250VAC521531
480VAC31.50.831.50.8
600VAC110.51.510.5
8VDC1063106
14VDC1063106
30VDC64364
125VDC0.80.20.20.80.2
250VDC0.40.10.10.40.1
Surge currentNC30A(under)
NO20A(under)


NOTES:

1. Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec.max.(DC).

2. Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.

3. Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.


 Characteristics

Operation speed1mm-2m/s(WLCA2)
Operating frquencyMechanical: 120 operations/minute  Electical: 30 operations/minute
Contact resistance15mΩ max. (initial value)
Insulation resistance100mΩ min. (at 500VDC)
Dielectric strength50/60 Hz for 1 minute between terminals of the same polarity
50/60 Hz for 1 minute between current-carrying and non- current-carrying metal parts
1500VAC, 50/60 Hz for 1 minute between each terminal and ground
Vibration10-55Hz, 1.5mm double amplitude
ShockMechanical durable: 1, 000m/Sec2 (about 100G'S)
Malfunction: 300m/Sec2 (about 30G'S)
Ambient tempera- ture-10~+80℃ (With no icing)
Humidity<95% RH
WeightAbout 275g(WLCA2-2) 
Degree of protectionspecification: IP66


Operating Characteristics

Operating CharacteristicsModelWLCA2-2WL CA12-2-QWL CA12-2-QDWLCLWLDWLD1 D2WLD3WL NJ,NJ30,NJ-2,NJ-S2WL
CA32-41,CA32-42,
CA32-43,CA32-44
Operating forceOF (Max)8.83N8.83N8.83N2.55N26.67N26.67N26.67N1.47NReverse force (Max)11.77N
Release forceRF (Min)0.49N0.49N0.49N0.1N8.92N8.92N8.92NReverse Pre-travel50°±5°
Pre-travelPT  (Max)25°±5°25°±5°25°±5°25°±5°1.7mm1.7mm1.7mm40±20mmPre-travel (Min)55°
Over-travelOT  (Min)60°60°60°60°6.4mm5.6mm4mmOver-travel (Max)35°
Movement differentialMD (Max)16°16°16°16°1mm1mm1mm